Description
Pack of 3 wet and dry sanding sheets in 600, 800 and 1200 grit.
- 1 off 230mm x 280mm of each grit
- Acrylic (Plastic) Repair Polish
- 5ml
Directions for use:
- Firstly, wet a piece of 600 grit sandpaper and rub it over the impacted area in a circular motion then repeat with a dry piece of the same sandpaper. Alternate between the wet and dry sandpaper in circular motions over the scratched area for a couple of minutes.
- Repeat the process above with both the 800 and 1200 grit sandpaper. The acrylic will become frosty looking, so don’t panic as this is part of the process.
- Next use the Acrylic (Plastic) Repair Polish by rubbing the scratched area (using a microfibre cloth) with great pressure for 2-3 minutes.
- Finally, remove any remaining polish with a cloth.